Home › Customisation

Radar Customisation Process & Acceptance Criteria

A transparent seven-step OEM flow — from requirement review to mass production — with written, measurable acceptance criteria.

Launston Engineering•2026-11-21•9 min read

"Can you build a radar to our spec?" — yes, and this page explains exactly how. We develop the antenna, RF front end, signal processing and firmware in-house, so range, beam pattern, interface, output format and housing can all be tailored. What follows is the actual process and, importantly, how we define "done".

The seven-step customisation flow

StepWhat happensYour inputOur deliverableTypical time
1. Requirement reviewEngineers assess feasibility of range, FOV, target types, environment and interfaceApplication brief, mounting space, target RCSFeasibility note + band recommendation1–3 days
2. Quotation & NRE scopeWe define engineering scope, sample cost and volume pricingEstimated volume, target priceQuotation + NRE breakdown + timeline2–5 days
3. Design & simulationAntenna and RF design, link-budget simulation, firmware architectureApproved specDesign review deck1–3 weeks
4. Prototype buildPCB, antenna and enclosure prototype assembled in our SMT linePO for samples2–5 working prototypes2–4 weeks
5. Bench & field validationRange, accuracy, FOV and environmental testing against the agreed criteriaTest site access if neededValidation report + raw target logs1–2 weeks
6. AcceptanceYou verify the prototype against the written acceptance criteria belowSign-off or change requestsAccepted sample + frozen spec3–7 days
7. Mass productionVolume SMT, calibration, RF test and packagingProduction POProduction units + CoC15–30 days
No surprise invoices: NRE (non-recurring engineering) is quoted separately and is credited in full or in part against volume orders, depending on the programme. We tell you the total cost before you commit.

Written acceptance criteria

Ambiguous specs cause disputes. Before prototype build we agree measurable criteria for every parameter that matters:

ParameterHow it is measuredExample acceptance value
Detection rangeStandard RCS corner reflector, stated weather, 95% detection probability0.2–120 m at RCS 1 m²
Range accuracy100 measurements at fixed distances, report mean error and standard deviation±3 cm (UAV77-O class)
Field of viewAzimuth and elevation angles where detection probability ≥90%120° × 60°
Update rateTarget list frames per second over the full interface≥20 Hz
Multi-target capacitySimultaneous tracked targets with ID stabilityup to 64
Interface & protocolFrame format document, CAN ID map, sample parsing codeCAN 500 kbit/s, defined frame
Power consumptionMeasured at nominal supply, typical and peak<1.5 W typical
EnvironmentOperating temperature, humidity, ingress protection-40 to +85 °C, IP67 / IP69K
EMC & regulatoryPre-compliance scan; CE / RoHS where applicableReport supplied

We supply the raw target logs so you can reproduce the measurements. If a criterion cannot be met, we say so at the design-review stage — not after you have paid for tooling.

What we need from you to start

  1. Application and environment (indoor/outdoor, weather, dust, vibration).
  2. Target description: typical size, material, RCS if known.
  3. Mounting space and mechanical constraints.
  4. Required range, FOV, accuracy and update rate.
  5. Interface and supply voltage on your platform.
  6. Estimated annual volume and target price band.

Send these to launston@launstontech.com or use the contact form. For standard products with minor changes, the process is usually shorter — see our 12-model product line and OEM guide.

Frequently asked questions

What is the typical total lead time for a custom radar?

From approved spec to accepted prototype is typically 4–8 weeks; mass production adds 15–30 days. Simple changes to an existing platform are faster.

Is NRE charged separately?

Yes, NRE is quoted separately and is often credited against volume orders. It is disclosed up front with no hidden engineering fees.

Can you customise the enclosure and branding?

Yes — housing, connector, label and packaging can be customised for OEM programmes.

What if the radar fails acceptance testing?

We review the raw data and retune firmware or antenna where feasible. If a requirement is physically unachievable, we tell you at design review before tooling.

Talk to a radar engineer

Send your detection range, mounting space, interface and environment. We reply within 24 hours with a part number and budgetary price.

Start an inquiry