Home › Insights › 24 / 77 / 80 GHz Band Selection

24 GHz, 77 GHz or 80 GHz: Selecting the Right mmWave Band by Application

A practical 24 vs 77 vs 80 GHz guide organised by application — range, resolution, regulation and specific model recommendations.

Launston Engineering•2026-11-21•10 min read

Earlier we published a focused comparison of 24 GHz and 77 GHz. This guide completes the picture by adding 80 GHz and organising the decision around applications rather than specifications. If you are choosing a band for a new programme, start here.

Three bands, three jobs

BandStrengthTypical rangeBest for
24 GHzLow cost, wide FOV, ISM band0.2–50 mBlind-spot, micromobility, short-range proximity
77 GHzFine resolution, multi-target, automotive grade0.2–280 mADAS, drone avoidance, harvesters, 4D imaging
80 GHzLong range, narrow beam, high speed accuracy0.5–300 mTraffic flow, speed measurement, fixed-angle sensing

24 GHz: the cost and coverage choice

24 GHz remains the right answer when the job is close-range, wide-angle detection at low cost and high volume. The physics helps: at a given physical antenna size, a lower frequency gives a wider beam. Our 24-FCW motorcycle radar covers 0.2–50 m over 100° for blind-spot warning; the L2408 handles low-speed AEB at 0.1–30 m. Both are compact, low-power and cost-effective for two-wheelers and small vehicles.

Regulation is also simpler: 24.00–24.25 GHz is an ISM band available in nearly every market without an individual licence — useful when shipping to 20+ countries.

77 GHz: the performance choice

77 GHz offers much greater usable bandwidth, so range resolution is roughly three times better than 24 GHz, and angular resolution improves in a given aperture. Move to 77 GHz when your requirement includes long range with tight accuracy, multi-target tracking in clutter, or operation in dust, rain and darkness.

  • Drones: UAV77-O at 0.1–120 m, ±3 cm, 120°×60°, ≥20 Hz. UAV77-A for altitude hold at ±0.02 m.
  • Commercial vehicles: L7706 forward collision at 0.2–210 m with 64 targets; L7701 truck blind spot; L7733 passenger-car BSD with CAN-FD and AEC-Q100.
  • Agriculture and industry: L5261 at 0.2–80 m with IP69K for harvesters.
  • High-detail imaging: XD70, 76–81 GHz, 8T8R, 300 m, 20,000 points/s.

80 GHz: the traffic and long-range choice

80 GHz is a specialised band that excels where you need to look far, hold a narrow beam and measure speed precisely. The T8000 covers 0.5–300 m with ±0.3 m range accuracy and ±2 km/h speed error, with Ethernet and RS485 in an IP67 housing. For fixed-angle speed sensing, the STJ1/R200 platform uses 77 GHz where local regulation prefers it.

Decision shortcut: blind-spot or micromobility → 24 GHz. ADAS, drones, harvesters or imaging → 77 GHz. Traffic flow and speed → 80 GHz. If two bands could work, choose the one your controller and certification path already support.

Regulatory and integration notes

77–81 GHz is allocated for automotive radar in most major markets, which is why the ecosystem and component costs there are strong. 80 GHz traffic radars may require local type approval — check your country's frequency plan before freezing the design. Interface choice (CAN, CAN-FD, RS485, Ethernet) should follow the platform; see our interface selection guide.

Frequently asked questions

Is 80 GHz better than 77 GHz?

Neither is universally better. 80 GHz supports very narrow beams and long range for traffic; 77 GHz has the automotive ecosystem and is better for ADAS, drones and imaging.

Can I use one radar design across all three bands?

No — the antenna and RF front end are band-specific. But because we develop both in-house, we can often keep the same housing and mounting across bands for a custom programme.

Which band needs frequency licensing?

24 GHz ISM is generally licence-free. 77/80 GHz allocations vary by country; most allow automotive or ISM use but type approval may apply.

What if my application sits between two bands?

Send us the range, target size, FOV, environment and interface. Our engineers will recommend a band and a specific part number — see the FAQ centre.

Talk to a radar engineer

Send your detection range, mounting space, interface and environment. We reply within 24 hours with a part number and budgetary price.

Start an inquiry