Home › FAQ

Radar FAQ: Procurement & Engineering Questions

Straight answers to the questions B2B buyers ask before specifying a radar — each linked to the exact spec, datasheet or guide.

Launston Engineering•2026-11-21•9 min read

These are the questions B2B buyers most often ask before specifying an mmWave radar. Each answer links to the exact product page, datasheet or engineering article where the detail lives, so you can verify rather than take our word for it.

Selection & fundamentals

Which radar band should I choose: 24, 77 or 80 GHz?

Use 24 GHz for short-range wide-angle blind-spot at low cost; 77 GHz when you need fine range accuracy and multi-target tracking at 50–280 m; 80 GHz for long-range traffic flow and speed measurement. Full comparison in our band-selection guide. See band selection guide ›

Can I get a sample before placing a volume order?

Yes. We accept sample orders (MOQ from 1 piece) so you can validate the radar on your own platform before committing to production volumes. See request a sample ›

What is the lead time for samples and for mass production?

Samples typically ship in 7–15 days; mass production runs 15–30 days after order confirmation, depending on volume and customisation depth. See process & acceptance ›

Which interfaces do your radar modules support?

Depending on the model: CAN, CAN-FD, UART, RS485 and Ethernet. Blind-spot modules commonly use CAN or UART; traffic radar offers Ethernet and RS485. See interface selection guide ›

Do you support CAN-FD, and which models?

Yes. CAN-FD is available on the L7733 passenger-car blind-spot radar and the adaptive-cruise (FCW-4T4R-V10) platform. See L7733 spec ›

What certifications do your radars carry?

Our modules are CE and RoHS compliant and our factory is ISO 9001 certified; IATF 16949 is in progress. Specific EMC and automotive-grade reports are available per model on request. See certifications ›

Can you customise detection range, field of view or firmware?

Yes. We develop antenna, RF front end and signal processing in-house, so range, beam pattern, interface, output format and firmware logic can be tailored to your platform. See our OEM process. See customisation process ›

Do you provide IP67 or IP69K rated radars?

Yes. Most outdoor modules are IP67; the L5261 harvester radar is IP69K rated for high-pressure washdown in agricultural environments. See L5261 spec ›

How does mmWave radar compare with cameras and lidar?

Radar works in fog, dust, rain and darkness and measures velocity directly; cameras need light and struggle in glare; lidar is precise but affected by weather and costlier. Many systems fuse radar with vision. See radar vs camera vs lidar ›

What is the minimum order quantity (MOQ)?

MOQ starts at 1 piece for evaluation. Volume pricing is quoted separately based on annual quantity and customisation. See get a quote ›

Integration & interfaces

Can the radar detect and track multiple targets at once?

Yes. The L7706 forward-collision radar tracks up to 64 targets, and our 4D imaging radar XD70 outputs up to 20,000 points per second. See L7706 spec ›

What is the accuracy of your drone obstacle-avoidance radar?

The UAV77-O offers ±3 cm range accuracy over 0.1–120 m with a 120°×60° field of view and update rate of at least 20 Hz. See UAV77-O spec ›

Is your radar suitable for agricultural harvesters?

Yes. The L5261 is designed for harvesters: 0.2–80 m, 100°×30°, IP69K, CAN and RS485, and operates from -40 to +85 °C. See L5261 spec ›

Do you have a radar for truck blind-spot detection?

Yes. The L7701 covers 0.2–4 m laterally up to ±7 m with audible and visual alarms, designed specifically for heavy trucks. See L7701 spec ›

Can you supply a 4D imaging radar compatible with PX4?

Yes. XD70 is a 76–81 GHz 4D imaging radar with 8T8R (64 virtual channels), 300 m range and 20,000 points/second, PX4 compatible. See XD70 details ›

What is the difference between blind-spot radar and front-collision radar?

Blind-spot radar monitors close range at the side (typically 0.2–50 m, wide angle) for lane changes; front-collision radar looks forward at longer range (up to 210–250 m) to warn of closing vehicles. See product overview ›

How do I integrate the radar output into my ECU or flight controller?

Most modules output target lists over CAN/CAN-FD or UART with a documented frame format. We provide the protocol document, sample code and engineering support during integration. See integration guide ›

Do you provide datasheets and 3D drawings?

Yes. Each product page links its PDF datasheet; mechanical drawings, connector pinouts and protocol documents are supplied after NDA or at sample stage. See datasheets ›

Applications & business

What is the operating temperature range?

Standard modules operate from -40 to +85 °C; the L5261 harvester radar is rated to the same range with IP69K sealing. See spec ›

Do you have a speed radar for traffic enforcement?

Yes. T8000 is an 80 GHz traffic-flow and speed radar: 0.5–300 m, ±0.3 m range accuracy, ±2 km/h speed error, Ethernet and RS485, IP67. See T8000 spec ›

Are you a manufacturer or a trading company?

We are a manufacturer founded in 2012 in Shenzhen, with in-house antenna design, RF front end, signal processing, SMT assembly and RF testing. You can see our production line on the manufacturing page. See manufacturing ›

Can you support OEM/ODM with our brand and packaging?

Yes. We support OEM/ODM including custom firmware, labelling and packaging. Share your requirement and we will return a scope and NRE quotation. See OEM process ›

What happens if the radar does not detect reliably in my environment?

Send us the failing scenario (target, distance, weather, mounting). Our engineers review the raw target data and can often retune firmware or beam pattern; if the requirement cannot be met, we say so before you commit. See acceptance criteria ›

Do you ship worldwide and which countries do you export to?

Yes. We export to 20+ countries across Europe, Asia and the Americas. Standard modules ship with full export documentation. See contact ›

How do I request a quotation or technical support?

Use the contact page or email launston@launstontech.com. Include your application, target range, interface, quantity and timeline for a faster reply. See contact ›

Cannot find your question? Email launston@launstontech.com with your application, target distance, interface and environment. Our engineers usually reply within 24 hours.

Talk to a radar engineer

Send your detection range, mounting space, interface and environment. We reply within 24 hours with a part number and budgetary price.

Start an inquiry